Bâche Pour Tous
Tarpaulins manufacturing and repair

tarp for trailer

flat tarp

Flat tarpaulins

Finishing

Reinforcement: The weak points including corners are reinforced by a piece of canvas bringing the protection of sensitive areas to two layers.  
Assembly: welding is used for the hems and stitching for corners.  
Eyelets:  eyelets have an inner diameter of 16mm to accommodate most of the bungee cords.   By default made of galvanized steel, they are   also available in copper or nickel finish. The eyelets are placed approximately every 30cm.  
Note: Oval eyelets are provided when the fenders of the trailer does not allow the installation of brackets (in case of trailers with double axles). In this case, tourniquet devices are provided.
Hook: Fasteners to install on the trailer are either a hook or a roulette. Their position will be determined by the chosen type of elastic. In the case of a spring surrounding the assembly of the trailer, the hooks are arranged in quincunx with respect to the eyelets. In the case of individual elastic, the hooks must be placed opposite the eyelets.  

Your choice 

Elastic attachment:   Unique long surrounding elastic, or one small elastic per eyelet  
Fixed hooking parts:   galvanized steel hooks or plastic wheels with throat  

Sample prices

Dimensions (cm)    114x170       133x200       133x254   
h=14cm 107€ 118€ 142€

High tarpaulins

high tarp

Finishing

Reinforcement: The weak points including corners are reinforced with extra fabric piece bringing to two layers the protection of fragile areas . The opening areas are also reinforced
Assembly: According to the dimension (& lt; 3m), the top and the two side parts are in one piece ensuring a perfect seal. Both front and rear faces are welded and sewn to the upper part. A reinforcement is intended to avoid tearing. Similarly to the flat sheets, the edges are welded. Covers above 3m are welded.
Opening: The rear and / or front openings are based on a rollable fabric covering the entire opening. The wounded portion is fastened by straps. The closure is performed by passing the straps through the trigger guard. From a simple construction, the closure is robust and reliable.
Eyelet: a 16mm inside diameter to accommodate most cords and resilient. Eyelets are by default galvanized steel, but also available in copper or nickel finish. Oval eyelets are provided when the fenders of the trailer does not allow the hook pose (case of trailers with double axles). In this case, tourniquet devices are provided.  

Hooking: the hooks will be placed opposite the eyelets. The elastic device is not provided with the high sheeting. See tips and tricks.  

Your choice 

Elastic attachment:   A unique surrounding elastic, or a small elastic per eyelet  
Fixed hooking parts:   galvanized steel hooks or plastic wheel with throat  

Sample prices

Dimensions (cm)    114x170       133x200       133x254   
h=80 cm 320€ 350€ 498€